Crack-resistant and waterproof tiling
Fixing all types of tiles on floors, ceramic and highly porous tiles on walls in new constructions. The polymer-modified cement-based construction adhesive needs to be mixed with water for installation of tiles on wall and floor. This ceramic tile adhesive is water resistant and does not allow cracking of tiles.
- Ready-to-use ceramic wall tile adhesive. Needs no curing.
- Water resistant.
- Saves time and increases productivity.
- Excellent adhesion and low shrinkage.
- Accommodates thermal and physical movements.
How To Use Roff Cement
The surface should be sound and thoroughly cleaned. Old surfaces should be free from wax, grease, polish, etc.
Add three parts of Roff New Construction Tile Adhesive (NCA) powder to one part of water. The addition of water should be adjusted to attain the desired consistency. Always add water to the ceramic wall tile adhesive.
Mix the required quantity only, enough to be used within 60-minute pot life.
Spread the ceramic tile adhesive to a required thickness bed and comb with a notched trowel. Remember to only apply the adhesive paste that can be tiled within 10-15 minutes.
Start placing the tiles on the surface. Tap the tiles properly to ensure complete coverage on the back of the tiles.
Allow it to set for 24 hours and start filling the joints the next day with Roff Rainbow Tile Mate (RTM) Epoxy tile grout.